update some deisng parameters and add new cases

cases/pan-tilt-head/case.yml

@@ -0,0 +1,148 @@
+---
+schema_version: 1
+name: Pan/Tilt Head
+slug: pan-tilt-head
+generator:
+  sha256: 965260d4d402fd8894f30aa863224e2c9b42dc61a1496f01e2f00b509f9624db
+  created_with: feather-case-wizard
+parameters:
+  top_profile: oled128x64
+  wing_count: 3
+  wing_pitch: 12.25
+  stack_height_override: 38.0
+  generic_component_height: 3.0
+  generic_top_gap: 2.0
+  gps_antenna_height: 6.0
+  gps_top_gap: 5.0
+  oled_component_height: 2.4
+  oled_display_height: 1.5
+  oled_face_gap: 0.8
+  button_a: true
+  button_b: true
+  button_c: true
+  button_reset: false
+  button_projection: 1.5
+  button_cap_size:
+  - 5.0
+  - 3.2
+  button_flange_size:
+  - 6.6
+  - 3.6
+  button_flange_thickness: 0.9
+  button_travel: 0.5
+  button_contact_extension: 0.7
+  battery_enabled: false
+  battery_length: 69.0
+  battery_diameter: 18.0
+  battery_radial_clearance: 0.6
+  battery_end_clearance: 1.0
+  switch_hole_diameter: 12.0
+  switch_hole_compensation: 0.3
+  switch_cap_diameter: 8.0
+  switch_flange_diameter: 16.2
+  switch_body_length: 24.0
+  switch_body_diameter: 12.0
+  switch_wire_allowance: 3.0
+  tripod_insert_enabled: true
+  tripod_insert_length: 6.4
+  tripod_insert_hole_diameter: 8.8
+  tripod_thread_clearance_diameter: 6.8
+  tripod_boss_diameter: 14.0
+  m25_insert_length: 4.0
+  m25_insert_hole_diameter: 3.7
+  m25_screw_clearance: 2.8
+  m25_boss_diameter: 7.0
+  insert_entry_chamfer: 0.6
+  insert_melt_relief: 0.8
+  wall_thickness: 2.4
+  floor_thickness: 2.4
+  lid_thickness: 3.2
+  corner_radius: 4.0
+  board_bottom_clearance: 5.4
+  board_side_clearance: 7.0
+  board_rear_clearance: 20.0
+  usb_board_wall_gap: 20.0
+  lid_lip_depth: 2.4
+  lid_lip_thickness: 1.2
+  fit_clearance: 0.35
+  cutout_min_web: 1.2
+  hole_compensation: 0.2
+  lid_screw_head_diameter: 5.2
+  lid_screw_head_height: 2.5
+  usb_opening_enabled: true
+  usb_guide_enabled: true
+  usb_connector_overhang: 2.0
+  usb_guide_wall_thickness: 1.2
+  usb_guide_end_gap: 1.0
+  usb_opening_width: 12.5
+  usb_opening_height: 7.0
+  usb_opening_radius: 1.5
+  usb_vertical_offset: 0.0
+cutouts:
+- name: Antenna
+  face: left
+  shape: circle
+  horizontal: 30.4
+  z: 31.299999999999997
+  width: 6.5
+  height: 6.5
+  radius: 3.25
+- name: Servo
+  face: rear
+  shape: roundrect
+  horizontal: 20.83
+  z: 35.0
+  width: 10.0
+  height: 5.0
+  radius: 1.25
+- name: Release
+  face: rear
+  shape: circle
+  horizontal: 20.83
+  z: 20.0
+  width: 6.0
+  height: 6.0
+  radius: 3.0
+- name: Power
+  face: front
+  shape: circle
+  horizontal: 20.83
+  z: 31.65
+  width: 8.0
+  height: 8.0
+  radius: 4.0
+outputs:
+  formats:
+  - 3mf
+  coupons: []
+  assembly_exploded_view: 8
+resolved:
+  extra_cutouts:
+  - - left
+    - circle
+    - 30.4
+    - 31.299999999999997
+    - 6.5
+    - 6.5
+    - 3.25
+  - - rear
+    - roundrect
+    - 20.83
+    - 35.0
+    - 10.0
+    - 5.0
+    - 1.25
+  - - rear
+    - circle
+    - 20.83
+    - 20.0
+    - 6.0
+    - 6.0
+    - 3.0
+  - - front
+    - circle
+    - 20.83
+    - 31.65
+    - 8.0
+    - 8.0
+    - 4.0