adjust the stand a bit

lib/moon_model/generator.rb

@@ -147,7 +147,7 @@ module MoonModel
         dimensions = stand["dimensions_mm"].map { |value| format("%.2f", value) }.join(" × ")
         <<~TEXT
           - Stand style: Orbital triskelion
-          - Stand safety model: Terrain envelope v2 (rotation independent)
+          - Stand safety model: #{stand["safety_model"]} (rotation independent)
           - Stand dimensions: #{dimensions} mm
           - Conservative terrain radii: #{format("%.3f", stand["minimum_terrain_radius_mm"])}–#{format("%.3f", stand["maximum_terrain_radius_mm"])} mm
           - Stand contact radius/height: #{format("%.2f", stand["contact_radius_mm"])} / #{format("%.2f", stand["contact_height_mm"])} mm
@@ -155,6 +155,9 @@ module MoonModel
           - Guaranteed Moon bottom height: #{format("%.2f", stand["guaranteed_moon_bottom_height_mm"])} mm
           - Non-contact arm clearance: at least #{format("%.2f", stand["noncontact_arm_clearance_mm"])} mm
           - Stand footprint capped to build area: #{stand["bed_capped"] ? "yes" : "no"}
+          - Stand construction: one connected solid; six branches support three concave pads
+          - Elevated underside area over 45° from vertical: #{format("%.1f", stand["overhang_area_above_45_deg_mm2"])} mm²
+          - Stand printing: #{stand["print_guidance"]}
         TEXT
       else
         ""
@@ -252,6 +255,7 @@ module MoonModel
           "# Printing\n\nThe one-piece hollow Moon requires slicer-generated build-plate adhesion and support appropriate to the selected material. Internal supports may be difficult to remove and can break loose inside the finished Moon.\n"
         end
       end
+      text += "\n## Stand\n\n#{result.statistics["stand"]["print_guidance"]} Check the sliced layers beneath the paired branches and flared pad cradles before printing.\n" if result.statistics["stand"]
       path = File.join(write_dir, "ASSEMBLY.md")
       File.write(path, text)
       path